GB/T 10656-2008 锅炉用水和冷却水分析方法 锌离子的测定 锌试剂分光光度法

作者:标准资料网 时间:2024-05-19 16:59:40   浏览:8499   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:锅炉用水和冷却水分析方法 锌离子的测定 锌试剂分光光度法
英文名称:Analysis of water used in boiler and cooling system - Determination of zinc - Zincon spectrophotometry
中标分类: 化工 >> 化学助剂、表面活性剂、催化剂、水处理剂 >> 水处理剂基础标准与通用方法
ICS分类: 化工技术 >> 分析化学 >> 化学分析
替代情况:替代GB 10656-1989
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-04-01
实施日期:2008-09-01
首发日期:1989-03-22
作废日期:
主管部门:中国石油和化学工业协会
提出单位:中国石油和化学工业协会
归口单位:全国化学标准化技术委员会
起草单位:天津化工研究设计院
起草人:李琳、朱传俊、邵宏谦
出版社:中国标准出版社
出版日期:2008-08-01
页数:5页
计划单号:20062461-T-606
适用范围

本标准规定了锅炉用水和冷却水中锌离子的测定方法,适用于锅炉用水和冷却水中锌含量为0.4mg/L~5.0mg/L的测定。 本标准代替GB/T10656—1989《锅炉用水和冷却水分析方法 锌离子的测定 锌试剂分光光度法》。
本标准与GB/T10656—1989相比,在技术内容上并无变化,只是针对标准文本的结构和文字进行了修改。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T602 化学试剂 杂质测定用标准溶液的制备(GB/T602-2002,ISO6353-1:1982,NEQ)
GB/T603 化学试剂 试验方法中所用制剂及制品的制备(GB/T603-2002,ISO6353-1:1982,NEQ)
GB/T604 化学试剂 酸碱指示剂pH 变色域测定通用方法
GB/T6682 分析实验室用水规格和试验方法(GB/T6682-1992,neqISO3696:1987)

所属分类: 化工 化学助剂 表面活性剂 催化剂 水处理剂 水处理剂基础标准与通用方法 化工技术 分析化学 化学分析
下载地址: 点击此处下载
基本信息
标准名称:照相机后盖位置窗及尺寸
中标分类: 仪器、仪表 >> 电影、照相、缩微、复印设备 >> 照相机与照相器具
替代情况:原标准号GB 9186-1988;被JB/T 8249.6-1999代替
发布日期:
实施日期:2000-01-01
首发日期:
作废日期:2000-01-01
出版日期:
页数:4页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 仪器 仪表 电影 照相 缩微 复印设备 照相机与照相器具
Product Code:SAE J551/1
Title:Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (16.6 Hz to 18 GHz)
Issuing Committee:Electromagnetic Compatibility (Emc) Standards
Scope:ScopeThis SAE Standard covers the measurement of radio frequency radiated emissions and immunity. Each part details the requirements for a specific type of electromagnetic compatibility (EMC) test and the applicable frequency range of the test method. The methods are applicable to a vehicle or device powered by an internal combustion engine or electric motor. Operation of all engines (main and auxiliary) of a vehicle or device is included. All equipment normally operating when the engine is running is included. Operator controlled equipment is included or excluded as specified in the individual document parts.The recommended levels apply only to complete vehicles in their final manufactured form. Vehicle驴mounted rectifiers used for charging in electric vehicles are included in Part 2 of this series of documents when operated in their charging mode.Emissions from intentional radiators are not controlled by this document. (See applicable, appropriate regulatory documents.) The immunity of commercial mains powered equipment to overvoltages and line transients is not covered by this document.